Thermostats

Venstar's ACC-TSENWIFI WiFi Temperature Sensor for the Explorer and ColorTouch thermostats: T3700, T3800, T3900, T4700, T4800, T4900, T7850, T7900, T8850, and T8900. Allows wireless communication of the remote, outdoor, supply, or return duct temperatures. Enables Supply Air Temperature Alerts where an alert will be sent if the supply air duct temperature does not reach a user-programmed temperature within a user-programmed amount of time.

*Note: Venstar Phone Controlled* Thermostat: T1800 (Residential) requires the use of Venstar Comfort Call Phone Controller (ACC0433) (not included). Note: Common wire required. If common wire not available see here for solution.

*Note: Venstar Phone Controlled* Thermostat: T1800 (Residential) requires the use of Venstar Comfort Call Phone Controller (ACC0433) (not included). Note: Common wire required. If common wire not available see here for solution.

*Note: Venstar Phone Controlled* Thermostat: T1800 (Residential) requires the use of Venstar Comfort Call Phone Controller (ACC0433) (not included). Note: Common wire required. If common wire not available see here for solution.

The Venstar ACC-TSEN Remote Indoor/Outdoor Air Temperature Sensor measures indoor or outdoor air temperature with a range of -20 to 120° F. If used indoors as a remote temperature sensor, the sensor will read room temperature and send the information to the ColorTouch thermostat. If used as an outdoor temperature sensor, the sensor may be used to provide outdoor temperature information (which is not used to control heating or cooling).

If you use a Venstar programmable thermostat, you can adjust the temperature in your home manually from the comfort of your sofa, using a tiny handheld remote control. The Thermostat IR Control & Receiver comes with a module that snaps into the RJ-11 port of the. Aim the included remote at the thermostat, and you'll be able to turn on the heat, adjust the air conditioning by a few degrees, or even turn the system off entirely.

If you are currently using or plan to purchase a Wireless Thermostat Receiver with one or more Wireless Thermostat Senders, each sold separately, you can use this Wireless Thermostat Two-Wire Heat-Only Kit to start or expand a wireless system to allow for control of most two-wire heat-only devices.

Connection kit (12VDC transformer) for wiring the following thermostats to your Sensaphone, WisDom, or CT241*: FGD-0064 (TH141HC28) TH13501 TH1402801 *Note: This transformer is NOT required for the CT-240.  It is only necessary with the CT241, Sensaphone, and WisDom.

Snagless CAT-5/5E Patch Cables (25-ft; Gray) 25-ft Gray Premium cabling for CAT-5/5E applications Rated for 350 MHz/1 GBps communications IEEE 802.3ab PVC 4-pair stranded UTP All cables feature boots with RJ45 male connectors Lifetime warranty