Availability:  Usually ships in 1 to 3 business days.

ARRA Compliant.  Contact us for details.

Introducing the next generation in Sensaphone monitoring - WIRELESS SENSORS! The Sensaphone design experts have incorporated a powerful wireless sensor technology into the new Sensaphone 2800 system. Four hard-wired universal inputs are included, just like in the Sensaphone 1400 product, but the 2800 adds four more wireless sensors for a total of eight.

Each wireless sensor can be located up to 300 feet away from the 2800, and even further when used with the available repeater modules. The 2800 will automatically detect and configure new wireless sensors making installation a breeze. Sensors are available for a variety of input types, including temperature and custom scalable 4-20mA analog transducer readings. See the part number list below for all available wireless sensor types.

The wireless sensors can operate on batteries for approximately three years. The condition of the batteries in each wireless sensor is automatically monitored by the 2800. Wireless sensors are perfect for monitoring multiple greenhouses, barns, freezers, walk-in coolers, or any installation where running long wires is not practical or convenient.

The New 2800 still performs alarm notification and status using standard telephone lines and custom voice messages. It comes standard in a sealed, weatherproof, lockable enclosure with battery backup, power failure monitoring, and high sound level monitoring.

Also included on the 2800 are four traditional, hard-wired sensor inputs. These are Sensaphone Universal Inputs that can be used with temperature sensors, dry contact sensors, and even 4-20mA transducers. So, when you have monitoring requirements near the 2800, just wire them in. When wiring is inconvenient or further away, just stick the wireless sensors where you need them. The wireless sensors will operate up to 300 feet line-of-sight away from the 2800. Not far enough? Just add a wireless repeater to go farther. The repeater can be located up to 4000 feet line-of-sight from the 2800. Then, one or more sensors can be located up to 300 feet line-of-sight from the repeater.

Notification

Just like the other Sensaphone products, the 2800 uses the reliability of a standard phone line to make phone calls to the appropriate personnel to announce alarm conditions. Each monitoring condition, both wired and wireless, can have a custom voice message attached to it. Each message is recorded in your own voice for easy alarm identification. Alarm notification will repeat out to eight people until acknowledged.

Applications

Use the 2800 to monitor multiple greenhouses without wires, multiple barns, coolers, freezers, or a wide variety of remote equipment. The new Sensaphone 2800 can be used anywhere you would use our other Sensaphone products. The 2800 just makes installa tion and expansion faster and easier. Extend your reach and monitor your critical remote locations with the new Sensaphone 2800.

---

Available Sensors (Click here to purchase Sensaphone 2800 Wireless Sensors):

Wireless Temperature Sensor...............................WSR-0100

Wireless Dry Contact Sensor.................................WSR-0101

Wireless Power Failure Sensor...................................WSR- 0102

Wireless Humidity Sensor...........................................WSR-0103

Wireless 4-20mA Sensor....................................WSR-0104

Wireless Motion Detector ...........................................WSR-0105

Wireless Water Detection Sensor................................WSR-0106

Wireless Zone Water Detection Sensor.......................WSR- 0107

Wireless Repeater.....................................................WSR-0199

Downloads

Sensaphone 2800 Brochure
Sensaphone 2800 Manual

Average lead time 1 to 3 business days.

This is a special order item.