Quantity:   

The Vehicle Alert is a simple to use vehicle motion detection system that operates on the principle that any moving ferrous metal object will distort the Earth's magnetic field to some degree. The technology used to measure this distortion is one of the most reliable forms of outdoor protection available. Unlike other outdoor motion detectors that sense heat, vibration or change in position of an object, the Vehicle Alert will sense only moving iron or steel. This makes the Vehicle Alert a selective sensor, reducing the possibility of false alarms from animals, falling tree branches or people in an outdoor environment. By selectively placing the Vehicle Alert sensor, you can detect cars and trucks entering or leaving an area as well as the movement of a parked vehicle such as your car, a boat or motor home. Objects not constructed of iron or steel can also be monitored by equipping them with a large magnet. When the object is moved in the immediate area of the sensor probe, the Vehicle Alert will activate. The model VAL-1 operates on 10-14 VDC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence.

This kit comes with the control unit, power transformer, and one 100' probe*.
*If you need a different probe length, you can build your system by starting with part number 1173 (control & transformer only) and then adding the appropriate probe length.

Use with your Sensaphone or WisDom to be alerted about cars in your driveway when you're not home!**
**When used with WisDom, either use your one wired zone or use with a Universal Transmitter to make it wireless.

• Hear a chime at the console and/or automatically activate lights, chimes, surveillance cameras, alarms, etc. whenever a vehicle enters the driveway. (Click here to shop for light and chime sets).
• System includes: Console, transformer and probe with 100' cable
• Two auxiliary Form A relays for switching on lights, alarms, cameras, bells, video camers, etc.
• Probes available with 10, 100, 200, 350, 500 or 1000 foot cable lengths. Maximum run is 2,500 feet.
• Six minute exit delay allows a vehicle to leave without activating the alarm

Follow the instructions for temporary installation and try your own ideas for monitoring the opening of steel garage doors or the movement of other selected objects. Once power is applied to the control console, a built-in start up interval allows the Exit Delay timer to set. This takes about 6 minutes to occur. Both of the lights in the car on the label of the Vehicle Alert should be on. At this time, the Vehicle Alert is unable to sound an alarm. Once the Exit Delay light has gone out, the unit is active. If you press the Test button on the front of the console, the alarm will sound and the relay outputs will switch. The buzzer time is adjustable. Refer to the owner's manual to set the duration. The Exit Delay button is used to disable the Vehicle Alert for a period of about 6 minutes. This delay can be used to allow someone to leave the monitored area without activating the buzzer or any of the other accessories connected to the Vehicle Alert. Likewise, if the lawn is being mowed or other work is being done in the area of the sensor probe, the Ext Delay can be used to disable the console for short periods of time. Lightning storms that are close to the location of the sensor probe can cause a disturbance in the area that the Vehicle Alert is monitoring. The Exit Delay can be used to disable the console until the storm passes. If the console needs to be disabled for long periods of time, unplug the power transformer from the wall outlet. This will turn the unit completely off. After the disturbance has passed, plug the transformer back in and allow the Exit Delay timer to reset. The console will again be operational.

If more than one location needs to be monitored, one additional sensor probe can be connected to the Vehicle Alert Console. The second sensor, however, will decrease the sensitivity of the other sensor, causing a reduced area to be monitored. Order Part #1012 for an additional Sensor Probe with 100 feet of cable.

Typical Applications: Residential Vacation Homes Farms or Ranches Warehouse Building Greenhouses areas Storage lots Private Drives

Features: Electronic controlled design 10- 14 VDC powered Two-zone monitoring capablity Exit delay timer Provides (2) SPDT outputs - can function either as dry contact or 12VDC Built-in audiable alarm Easy surface mount installation One year parts and labor; subject to conditions of limited warranty.

Accessory Options: 100 foot cable & Probe - P/N 1012 10 foot cable & Probe - P/N 1012-01 200 foot cable & Probe - P/N 1012-02 350 foot cable & Probe - P/N 1012-03 500 foot cable & Probe - P/N 1012-05 1000 foot cable & Probe - P/N 1012-10 Splice Kit - P/N 1082 Remote Annunciator (12 VDC) - P/N 1175 Plastic 3-gang SMT electrical Box - P/N 1110 Metal 3-gang SMT electrical Box - P/N L-018-0001 Wall Transformer P/N 1111 Voltage: 110 VAC - 12VDC regulated, 300mA.

Specifications: Power Requirements: Regulated 10-14 VDC @ 100 mA Current Draw (No accessories): Resting: 40 mA Alarm: 70 mA Buzzer Duration: 1 to 18 seconds Buzzer Sound Pressure Level: 88 db minimum @ 30 cm @ 12 VDC Exit Delay: Fixed @ 6 minutes Outputs: 2 SPST relay outputs Output Rating: 500 mA Console Size: 6.55" x 4.70" x 1" (16.6 cm x 11.9 cm x 2.5 cm) Operating Temperature: 32 to +130 F (0 to +54 C) Weight (Console, probe, 100' cable & transformer): 5.8 pounds (2.63 Kg) Cable Type: D

Downloads

Vehicle Alert Brochure
Vehicle Alert Owners Manual