Availability:  Temporarily out of stock. Contact us for ETA.

Old Code: M-001-0005, New Code: WB800

The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensor probes can be run up to 500 feet away (or 16 non-supervised sensors). Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. Four standard surface sensors are included with the unit. Wall transformer not included with unit.

Typical Applications: Residential or Vacation Homes Basement Sump Pumps Commercial Buildings Office and Computer Areas Unattended Buildings Greenhouses & Animal Buildings All Drain Areas Sprinkler Systems

Features: Reliable microprocessor design Versatile 12 or 24 Volt AC/DC power for operation No false alarms due to condensation or humidity Can monitor up to 8sensor probes - up to 500 feet away Provides (1) form "C" contact closure output for alarm Internal audible alarm with silence switch Easy surface mount installation One year parts and labor; subject to conditions of limited warranty.

Accessory Options: Standard surface sensor - P/N M-001-0106 Supervised surface sensor - P/N M-001-0094 Under carpet sensor - P/N M-001-0107 Supervised under carpet sensor - P/N M-001-0110 Wall Transformer P/N 1111 Voltage: 110 VAC - 12VDC regulated, 300mA.

Specifications: Console Size: 6.55" x 4.70" x 1" (16.6 cm x 11.9 cm x 2.5 cm) Probe Size (standard P/N #M-001-0106): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm) Probe Size (under carpet P/N #M-001-0107): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm) Power Requirements: 12V or 24V AC or DC Current Draw (resting state): 75mA @ 12V or 24VDC, or 200mA @ 12V or 24VAC Current Draw (alarm condition): 125mA @ 12V or 24VDC, or 330mA @ 12V or 24VAC Sensitivity: Will not alarm due to high humidity or condensation Operating Temperature: Control and Probe 32 to +140 F (0 to +60 C) Outputs: Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching) Audible alarm with silence feature Recommended Dist. Between Probes & Console: 500ft (152.4 m) maximum Recommended Max. Probes Per Console: 8 supervised or 16 non-supervised