Availability:  Usually ships in 1 to 2 business days.

Overview

The kit does not come with a GSM card. You will need to get an UNLOCKED GSM Sim card from a mobile carry, such as AT&T or T-Mobile. This Sim card allows the dialer to call the numbers you program in and not have to connect it to a hard wired phone line.

The Dakota Alert Wireless Security System: CAD-03-Kit Portable GSM Cellular Auto Dialer with Wireless Sensors is a do-it-yourself security dialer that uses GSM cellular service to send a message when an alarm is generated. When an alarm is caused by one of the wireless sensors or tamper switch the dialer will call out and play one of two ten second messages that you record yourself. You can program up to nine different telephone numbers for the dialer to call. There is an entrance and exit delay as well as a local alarm. The dialer can be triggered by wireless PIR sensors, shock sensors or door contacts. The back-up battery allows the dialer to operate for 12 to 24 hours without AC power. The ruggedized construction and plastic carrying case mean that the CAD-03 can be used at construction sites, RVs, boats or other hard to monitor locations. The only thing you will need to add is an active GSM Sim card (AT&T, T-Mobile, etc.) The dialer will work anywhere you have GSM cell service making it ideal for remote locations or homes that do not have a land line telephone.

The Cellular Auto Dialer (CAD-03) provides an easy do-it-yourself security solution. The rugged construction of the control panel/dialer allows the system to be used at construction sites, in vehicles and other areas that are difficult to monitor. The dialer uses the GSM cellular network to send a voice message to up to nine different phone numbers. The dialer can be programmed with entrance/exit delay and will be triggered by various wireless sensors or a tamper alarm.

Features

• Wireless alarm
• No telephone line required, GSM Dialer supports any standard UNLOCKED SIM card
• Programmable entry/exit delay time
• Two separate dialer alarms, alarm and panic
• Select up to 9 (32 digit) user programmable phone numbers for each alarm
• Different 10 second recordable message for each alarm; arm/disarm using keypad or remote keyfob
• Wireless panic
• Built-in tamper switch
• Built-in terminal block for alarm and siren connection
• DC adapter with rechargeable battery back-up
• Programmable as silent alarm (dialer only) or audible (siren + dialer)

Package Contents

• 1 control panel/GSM dialer
• 1 wireless PIR sensor
• 1 wireless shock sensor
• 1 power supply
• 1 back-up battery

Compatible Accessories

• Wireless PIR (AD-PIRW) - The passive infrared (PIR) detector operates on a 9 volt battery and will detect motion to a distance of about 40' in front of the sensor. The PIR will then send a radio signal up to 200' back to the auto dialer.
• Wireless Shock Sensor (AD-SSW) - The wireless shock sensor can be placed in a trailer, truck, RV, etc. and will detect the movement caused by someone tampering with the vehicle. The sensor will then send a radio signal up to 200' back to the auto dialer.
• Wireless Key Fob (AD-KFW) - The wireless key fob can be used to arm and disarm the auto dialer from a distance of about 200'. The key fob can also be used as a panic alarm.

Downloads

Dakota Alert Wireless Security System CAD-03-Kit Manual
Dakota Alert Wireless Security System CAD-03-Kit Brochure