Note: Common wire required. If common wire not available see here for solution.
Enjoy the convenience of a completely wireless remote control model that is easy to operate with many features; maximum comfort with minimum effort. Remove your old wall thermostat, replace it with the Venstar Wireless Thermostat Receiver (T1100REC) and then remotely control the temperature anywhere in your house with the Venstar Wireless Thermostat (T1100RF) (not included). The receiver is easy to install and is wired just like a standard 24VAC thermostat.
Note: Requires use of Venstar Wireless Thermostat (T1100RF) (not included)
Buy together as a kit - Venstar Wireless Thermostat Kit!
- Completely wireless - receiver can be mounted at unit or at old thermostat location
- Up to 4 thermostats can be used with one receiver
- Transmits through walls and floors - range up to 500 feet in clear air
- Transmits at 418MHz using pulse code modulation - won't interfere with other wireless systems
- Uses two AA lithium batteries
- 7 day programmable with 4 time periods per day and copy command
- 64 house codes allow installation of up to 64 systems within transmit range
- Base Station Receiver for wireless thermostat can be mounted at HVAC unit or at old thermostat's location.
- Up to 4 base stations can be used with each thermostat
- Approximate dimensions: 4.75" x 3.25"
Venstar thermostats require a minimum of 3 wires for heat and a minimum of 5 wires for heat/cool (6 or more may be required if you have a heat pump system or staging).
If you need assistance figuring out how many wires you'll need, email us at support@diycontrols.com, with a description of your HVAC system and a picture of your current thermostat wiring connections if possible. Please note that in rare cases, a manufacturer may use proprietary controls that may not be compatible with this thermostat.
No information available at this time. Feel free to contact us for further information.
No information available at this time. Feel free to contact us for further information.