Availability:  In Stock. Order by 2pm EST for same-business-day shipping.

Overview

This FloodStop unit can hook up to your Sensaphone or home security system to alert you that it was activated!

You can also have FloodStop automatically turn OFF an appliance, pump, or motor at the same time it turns off the water. See the available Control Sets (both 120V and 220V) under the "FloodStop" category above.

FloodStop (FS 1/2-NPT) Components:

• Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded)
• Control Unit (with Battery Backup 4 X C Size)
• Water/Leak Sensor (1.25" X 7.5")
• AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)
• Output Contact Wires (2)

How FloodStop (FS 1/2-NPT) Works:

• The FloodStop valve is installed between the appliance (water heaters, water softeners, or water main) and its manual shutoff valve.
• Water/leak sensor is placed at the base of the water heaters, water softeners, or water main
• Valve stays open until water loss is detected
• Water on sensor closes FloodStop valve and sounds alarm
• Valve stays closed until problem is attended to and system is reset

Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.

With Flood Stop, Property Damage is Avoided:
Water loss from unexpected appliance failures and supply line ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.

Automatic Water Shut Off Valves Comparison Chart