Availability:  In Stock. Order by 2pm EST for same-business-day shipping.

Overview

The WR-001 Lighting Receiver In-Wall Dimmer Switch was designed to operate a 300 watt load at 120 volts of alternating current (120VAC) for either incandescent or CFL bulbs. This switch features an On/Off or relay function as well as a dimming function which will only work with dimmable bulbs. To use this dimmer switch simply replace your old pr-existing switch with the new WR-001. Being that there is no neutral wire needed for the WR-001 to operate replacing the old with the WR-001 will be as easy as disconnecting then reconnecting two wires. Once properly installed you will be able to wirelessly turn on and off, or dim and brighten lights powered by the switch from a variety of SkylinkHome transmitters. This switch offers a touch-sensitive surface allowing you to control the load by a brush of your finger across the surface. Snap-on wireless remote TM-318 can be used as a remote controller for this dimmer and physically attaches to the switch face. When attached, the touch-sensitive surface is covered and the TM-318 is used to control the load. To achieve remote control over the WR-001 from a wireless transmitter, you must first program the switch to be a responder of that transmitter. The programming is a very simple process done with the set buttons located on the switch and on the transmitter. A maximum of 8 transmitters can be paired to one WR-001 dimmer switch. This allows you to add more wireless hand-held remote controllers, or motion sensors to your system for flexibility, security, and comfort.

Features

• Touch-sensitive control of load
• Simply replaces existing switch
• No neutral wire required
• On/Off, and dimming
• Works with incandescent & dimmable CFL bulbs
• Three operating modes.
• Energy saving countdown mode

Package Contents

• 1x - WR-001 ON/OFF Wall Switch Dimmer
• 1x - Package of wire nuts
• 1x - User's Instructions

Downloads

User Manual