Automatic Water Shut off Valves

The Valve Screamer Whole House Kit is a wireless water alarm and motorized valve system that protects your entire home or business from plumbing leaks. It consists of one Flood Screamer central control unit, two Water Puck moisture sensors, a sensor pad and a motorized ball valve. It is the easiest wireless water alarm system to use on the market and can be set up in minutes.

The Valve Screamer Whole House Kit is a wireless water alarm and motorized valve system that protects your entire home or business from plumbing leaks. It consists of one Flood Screamer central control unit, two Water Puck moisture sensors, a sensor pad and a motorized ball valve. It is the easiest wireless water alarm system to use on the market and can be set up in minutes.

Additional Sensor for use with any FloodStop unit. Provides additional detection/floor coverage. Comes with 1 meter (approximately 3 feet) of wire. Sensors can be plugged into each other ("chained") in a series. Sensor to sensor extension wires are available in 10' and 22' lengths.

If you would like the FloodStop Controller to be located further away from the FloodStop valve than the kit provides, our new 9 foot long white Controller to Valve Extension Wire(s) will fit the bill (one wire needed per valve).

Transformer extension wire for use with any FloodStop unit. Provides additional length between transformer and controls. 9 feet long.

Use the Sensor Manifold to deploy several sensors from your Floodstop unit to different parts of the room or house! Until now, Extra Sensors had to be daisy-chained one after another after another. With the Sensor Manifold, it allows you to deploy sensors in different directions without having to “double back” to place sensors in opposite directions from where sensor #1 and #2 were to be placed.

The Water Puck® Standard is an ultra low profile wireless water sensor for use with The Flood Screamer™ Wireless Water Alarm Control Unit.  When moisture comes in contact with any two adjacent sensor legs The Water Puck® Standard will send a wireless signal to The Flood Screamer™ triggering the 130 dB siren alerting you to a problem.

Newly redesigned WaterCop Classic flood sensors are placed in areas that are susceptible to leaks such as water heaters, washing machines, ice makers/refrigerators, sinks and toilets. When water contacts the sensor, a wireless signal is sent to the WaterCop Classic shut-off valve installed on the main water supply to close and stop the flow of water to the leak point.

Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding Flood sensors feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range, user adjustable digital security codes, and operate on either two (2) AA batteries or an optional AC power adapter.

Provides a quick, convenient, and positive shut-off of your main water supply at the touch of a button. Allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for the kitchen, utility room, or near a garage entry. Using standard category-5 computer cabling and RJ45 modular connectors (cabling and connectors not included) it can be located up to 300 feet from the WaterCop Classic Control Valve.

Operates wireless sensors without need for batteries. UL listed.

Newly designed signal repeater retransmitts Classic sensor signal to WaterCop Classic shut-off valve. Compatible with previous generation WaterCop Classic Sensors (WH100, WH200, FH100) as well as newly designed Classic Sensors (WCDFS1 & WCDFS2)

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

The WaterCop Low Temperature and Water Leak Sensor has a temperature sensor for monitoring a pipes exterior temperature and has a water sensor both connected on 5 foot cords. Monitor the temperature of pipes in locations at risk of freezing conditions (38degrees (+/-1) ). This sensor sends a signal to the Watercop Classic Actuator with Valve to turn off the water before pipes burst.

RSA-175-010 consists of a 10' length of sensing rope that can be connected to RSA-175-810 starter kit (10' length of sensing rope + 6' lead wire) or RSA-360-810 Rope kit for wireless sensors. Up to 9 additional RSA-175-010 can be added to the RSA-175-810 or RSA-360-810 for wide area of leak detection requirements.

Certain applications or leak detection requirements may require the use of this Sensing Rope in place of traditional FloodMaster sensor "pucks" – most notably when a wider area of leak detection is desired. This highly absorbent water sensing rope is constructed from two twisted metal conductor wires that are insulated from one another and surrounded by a polyethylene mesh braid jacket.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.