Automatic Water Shut off Valves

Spring Check Valve for use with the Leak Defense LDS system. These are installed to minimize backflow in the system.

Replacement 9VDC wall adaptor for Floodstop systems. Cable is approximately 5 1/2 Ft long. This is a replacement product, wall adapters are included with all Floodstop Systems.

Additional Sensor for use with any FloodStop unit. Provides additional detection/floor coverage. Comes with 1 meter (approximately 3 feet) of wire. Sensors can be plugged into each other ("chained") in a series. Sensor to sensor extension wires are available in 10' and 22' lengths.

Now it's easy to extend the distance of your sensor to another sensor or from a manifold to another sensor!  You can now choose to add an additional 10' or 22' of wire to your sensor. *Note: Only one extension wire can be used per sensor. For applications where wire length needs to be longer than 22 feet, splicing would be required.

Now it's easy to extend the distance of your sensor to another sensor or from a manifold to another sensor!  You can now choose to add an additional 10' or 22' of wire to your sensor. *Note: Only one extension wire can be used per sensor. For applications where wire length needs to be longer than 22 feet, splicing would be required.

If you would like the FloodStop Controller to be located further away from the FloodStop valve than the kit provides, our new 9 foot long white Controller to Valve Extension Wire(s) will fit the bill (one wire needed per valve).

Transformer extension wire for use with any FloodStop unit. Provides additional length between transformer and controls. 9 feet long.

Use the Sensor Manifold to deploy several sensors from your Floodstop unit to different parts of the room or house! Until now, Extra Sensors had to be daisy-chained one after another after another. With the Sensor Manifold, it allows you to deploy sensors in different directions without having to “double back” to place sensors in opposite directions from where sensor #1 and #2 were to be placed.

The Water Puck® Standard is an ultra low profile wireless water sensor for use with The Flood Screamer™ Wireless Water Alarm Control Unit.  When moisture comes in contact with any two adjacent sensor legs The Water Puck® Standard will send a wireless signal to The Flood Screamer™ triggering the 130 dB siren alerting you to a problem.

Provides a quick, convenient, and positive shut-off of your main water supply at the touch of a button. Allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for the kitchen, utility room, or near a garage entry. Using standard category-5 computer cabling and RJ45 modular connectors (cabling and connectors not included) it can be located up to 300 feet from the WaterCop Classic Control Valve.

Operates wireless sensors without need for batteries. UL listed.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Snagless CAT-5/5E Patch Cables (25-ft; Gray) 25-ft Gray Premium cabling for CAT-5/5E applications Rated for 350 MHz/1 GBps communications IEEE 802.3ab PVC 4-pair stranded UTP All cables feature boots with RJ45 male connectors Lifetime warranty

RSA-175-010 consists of a 10' length of sensing rope that can be connected to RSA-175-810 starter kit (10' length of sensing rope + 6' lead wire) or RSA-360-810 Rope kit for wireless sensors. Up to 9 additional RSA-175-010 can be added to the RSA-175-810 or RSA-360-810 for wide area of leak detection requirements.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

For use with WaterCop systems WCACT1, WPMS, and WPMSH units when paired with WCSCLV. UL listed.

AC/DC Adapter for AVD-45C Autodialer

Replacement wiring hardness for Floodstop Systems with two valves. Harness comes with an 84" wire to sensor and 33" wire to the valve.This is typically used for Floodstop Systems for sinks.

Replacement wiring hardness for Floodstop Systems with two valves. Harness comes with an 84" wire to sensor and 72" wire to the valve.This is typically used for Floodstop Systems for washing machines.