Automatic Water Shut off Valves

Replacement 9VDC wall adaptor for Floodstop systems. Cable is approximately 5 1/2 Ft long. This is a replacement product, wall adapters are included with all Floodstop Systems.

Additional Sensor for use with any FloodStop unit. Provides additional detection/floor coverage. Comes with 1 meter (approximately 3 feet) of wire. Sensors can be plugged into each other ("chained") in a series. Sensor to sensor extension wires are available in 10' and 22' lengths.

Now it's easy to extend the distance of your sensor to another sensor or from a manifold to another sensor!  You can now choose to add an additional 10' or 22' of wire to your sensor. *Note: Only one extension wire can be used per sensor. For applications where wire length needs to be longer than 22 feet, splicing would be required.

Now it's easy to extend the distance of your sensor to another sensor or from a manifold to another sensor!  You can now choose to add an additional 10' or 22' of wire to your sensor. *Note: Only one extension wire can be used per sensor. For applications where wire length needs to be longer than 22 feet, splicing would be required.

If you would like the FloodStop Controller to be located further away from the FloodStop valve than the kit provides, our new 9 foot long white Controller to Valve Extension Wire(s) will fit the bill (one wire needed per valve).

Transformer extension wire for use with any FloodStop unit. Provides additional length between transformer and controls. 9 feet long.

Use the Sensor Manifold to deploy several sensors from your Floodstop unit to different parts of the room or house! Until now, Extra Sensors had to be daisy-chained one after another after another. With the Sensor Manifold, it allows you to deploy sensors in different directions without having to “double back” to place sensors in opposite directions from where sensor #1 and #2 were to be placed.

Replacement wiring hardness for Floodstop Systems with two valves. Harness comes with an 84" wire to sensor and 33" wire to the valve.This is typically used for Floodstop Systems for sinks.

Replacement wiring hardness for Floodstop Systems with two valves. Harness comes with an 84" wire to sensor and 72" wire to the valve.This is typically used for Floodstop Systems for washing machines.

Replacement wiring hardness for Floodstop Systems with a single valve. Harness comes with an 84" wire to sensor and 33" wire to the valve.

Only for use with FloodStop wireless wholes house systems and the XSM wireless sensor modules. Floodstop extra sensor pad to protect your home in additional places of risk. Comes with 3 feet of wire.