Automatic Water Shut off Valves

The FloodMaster RS-080 Series of Total Water Main Shut-Off and Alarm is designed for localized leak detection (one room, one floor, etc.). When a leak is detected, the unit will automatically shut off the water main supply line. Specific model selection is based on the valve size required to interface to the designated water main pipe.

The FloodMaster RS-080 Series of Total Water Main Shut-Off and Alarm is designed for localized leak detection (one room, one floor, etc.). When a leak is detected, the unit will automatically shut off the water main supply line. Specific model selection is based on the valve size required to interface to the designated water main pipe.

The Dome Water Main Shut-Off is a Z-Wave Plus Certified device that installs over any standard 1/2” to 1” ball valve, and opens or closes the valve when given a signal. The Water Main Shut-Off consists of three main parts - the “MOTOR ASSEMBLY,” the “MOUNTING BRACKET,” and the “CONTROL ARM.” The MOUNTING BRACKET is clamped onto the pipe with HOSE CLAMPS and the CONTROL ARM secures around the VALVE HANDLE to control the valve, while the MOTOR ASSEMBLY connects to your home automation system and ties everything together.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

This interconnected dual valve actuator assembly is designed for use in condos or residences where the water supply to 2 water mains in close proximity to each other, need to be turned off simultaneously manually or via water sensor alert.   Requires two (WCVLF) WaterCop ready brass ball valves.