Sensaphone

The WSG Wireless Dry Contact sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and input terminals for connecting to any normally-open or normally closed output. (Use of this device with solid-state outputs is not recommended) The sensor comes with two AA alkaline batteries which will power the sensor for up to two years.

The WSG30 Wireless 4-20mA sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter, 4-20mA input and a 24V loop power supply. The sensor can be used to monitor the output of any 4-20mA transducer. The sensor comes with a plug-in power supply and three AA alkaline batteries which will power the sensor for several hours if main AC power fails.

The WSG30 Wireless Zone Water Detection Sensor is designed to work with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and ten feet of water sensing cable for monitoring for the presence of water in a particular area. The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope.

The WSG Wireless Humidity Sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and humidity sensor element for monitoring humidity wherever the device is installed. The sensor comes with two AA alkaline batteries which will power the sensor for up to two years.

Input card for Sensaphone Express II. Adds channels 9-16.

Input card for Sensaphone Express II. Adds channels 17-24.

Input card for Sensaphone Express II. Adds channels 25-32.

Input card for Sensaphone Express II. Adds channels 33-40.

Output card for Sensaphone Express II. Adds channels 1-8.

Output card for Sensaphone Express II. Adds channels 9-16.

With the addition of the optional battery backup module, the Sensaphone WEB 600 can monitor for power failures and stay operational for three full hours while the power is out.

With the rack-mountable Sensaphone IMS-1000 Single Room Monitoring Solution; a built-in web server lets users view status, make changes, and review history while the included relay output can switch local devices on/off based on alarm activity. Receive alarm notifications through e-mail, text messaging, and SNMP.

This is a special order product. See return policy here.

The Sensaphone IMS-4000 is a stand-alone infrastructure monitoring system with an integrated voice and modem, an internal UPS, flash-disk storage, and a web server, in a simple-to-install 1U rack-mountable package. The IMS-4000 has 8 environmental inputs, monitors power and 64 IP addresses. Up to 31 expansion nodes can be added to one IMS-4000 host, bringing the network to 256 inputs; 2,048 IP addresses; and 32 power locations monitored.

This is a special order product. See return policy here.

Sensaphone IMS-4002 Expansion Node adds 8 additional environmental inputs, the ability to monitor an additional 64 IP addresses and additional power monitoring to the Sensaphone IMS-4000 Host. Up to 31 Nodes may connect to any host.

Sensaphone IMS-4003 International Node for Sensaphone IMS-4000 with an external universal power supply.

Sensaphone IMS-4402 7' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4403 14' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4403 25' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4405 RJ-45 F/F Coupler Kit (4) for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4406 Wall Mount Kit for Sensaphone IMS-4000 The Wall bracket allows the IMS-4000 Host or Node to be mounted to any wall. It comes with (4) plastic drywall anchors and (4) #6 metal tapping screws. This is a special order item.