Sensaphone IMS-4850 Dry Contact Bridge (N/O, N/C) for
Sensaphone IMS-4000 or
Sensaphone IMS-1000
The IMS Dry Contact Bridge allows you to connect a dry contact alarm from any device to your
Sensaphone IMS-1000 or
Sensaphone IMS-4000 Host or
Sensaphone IMS-4000 Node. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts. The electrical connection between the sensor and IMS is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or rest on the floor.
The Dry Contact Bridge connects to the IMS via a RJ-45 cable (e.g. CAT5 cable). The connection from the sensor to the
Sensaphone Host or
Sensaphone Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the bridge to your structured wiring network via a RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
No information available at this time. Feel free to contact us for further information