Monitor two zones with one on-board temperature sensor and an additional remote temperature, humidity or water sensing probe. If temperatures and/or humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor, the designate relay for each zone will activate an alarm, dialer, siren, etc.

This unit does not come with a power supply. 12vdc Power supply is available for purchase separately (p/n 1111), 24vdc power supply available (p/n FGD-0054),  or you may provide your own.

• Available in 12 and 24 volt models (EA200-12 and EA200-24)
• Simultaneous operation of both zones
• Defrost time delay up to 120 minutes
• Easy to read large LCD display
• Eight event alarm memory with time and date
• Auxiliary output relay for local audible alarm
• Auxiliary alarm silence feature with 10 minute timer
• Each zone has offset calibration adjustment
• Temperature and Humidity high/low set points
• Output relays can be configured to be initially energized or de-energized
• Tamper proof lock setting
• Snap fit mounting base with main housing for easy access
• Plug in terminal strip connectors for easier wire termination
• Zones being monitored are displayed every few seconds
• Display F°, C°, % (Humidity) or Water Drop icon
• Zone configuration retained in memory if power is lost

User Manual

Quick Start Guide