Flood/Water

The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation.

A reliable float for water tank, water level and sump pit applications. Reliable monitoring using reed switch technology. The PumpAlarm Cellular Alarm will send text message notifications when water levels are able to lift the float.  Prevent damage associated with water levels in your basement or light commercial application.

The supervised under carpet water sensor can be connected to the EnviroAlert products as well as the WB-800. The alarm will be activated if water is present as well as if the cable is cut. Supervised under carpet water sensor for the WaterBug 800, EnviroAlert 200, EnviroAlert 400, and EnviroAlert EA800-ip.

The standard surface water probe is unsupervised and can be connected to the full line of WaterBug products only. Alarm will sound when water is detected but no alarm will sound if the cable is cut. Additional surface sensor for the WaterBug 200 or WaterBug 350 models.

Supervised surface water sensor for use with the WaterBug 8 zone water detection monitor (WB-800) or the EnviroAlert (EA200, EA400, OR EA800-ip). Stable surface mount design. Supervised probes will alarm if wire is severed as well as when water is detected. Maximum recommended cable run [22 AWG twisted pair] 500’ (152.

The Sump Bobber is a simple float switch designed to monitor the water level in a sump pump well. Easily configured as a normally open or normally closed switch. Hose clamp allows easy level adjustment.