These remote wireless water sensor SPucks® are a great add-on to the Marcell® Cellular Connected Monitoring System. Simply place these small, battery-powered wireless sensors behind toilets, under sinks, next to hot water heaters alongside your sump pumps or anywhere you could have a potential water problem.
Water Hero K-100 Flow Monitor provides digital, real time water flow information non-invasively by detecting the magnetic field of a traditional municipal water meter. The K-100 connects through your WiFi network and reports flow rate and ambient room temperature to the cloud.
Water Hero's K-100 unit is as accurate as a typical positive displacement meter, detecting flow as low as about 1/8 gallons per minute.
One sensor, two readings. Better precision and real-time alerts mean your basement is protected.
The PumpAlarm Cellular Alarm will send text message notifications when water levels reach either float level. Messages are fully customizable, so you’ll know which float is upper level and which is lower level.
A reliable float for water tank, water level and sump pit applications. Reliable monitoring using reed switch technology.
The PumpAlarm Cellular Alarm will send text message notifications when water levels are able to lift the float. Prevent damage associated with water levels in your basement or light commercial application.
Wireless Water and Temperature Sensor Transmits up to 120 feet to Flasher to Alert Your Neighbors when Freezing Temperatures or Flooding Threaten Your Home or Cabin
Wireless low temperature (40 degrees F) and flood sensor transmitter can be located anywhere within 120 feet of LED flasher/receiver to monitor for hazard conditions while the homeowner is away.
Sounds an alarm and an auxiliary alarm contact output!
The WaterSiren Pro is an affordable solution to alerting you quickly of water leaks and it can close (or open) an alarm contact which can trigger an alarm system or a telephone dialer such as our TempAlarm Pro (FA-900E) or older Deluxe FreezeAlarm (FA-D2).
The HS-700E HomeSitter Dialer will sound an audible alarm and call up to three telephone numbers using a landline phone connection to protect your home from damage caused by temperature extremes, water leaks or power failures.
Did you know that on average, frozen pipes that crack and burst damage a quarter million properties each year? Water heaters with a slow leak or a sudden burst can also cause extensive damage; the worst, most costly damage occurring in unoccupied homes.
The best defense against water damage to your home, business or vacation rentals is the La Crosse Alerts Water Detector with wireless alerts to notify you of a water leak before it has time to cause extensive damage.
Automatic alerts help you protect property from water damage by detecting water from broken pipes, faulty hoses, or overflowing skins and sumps. Temperature and humidity alerts helps you protect people, pets, plants, and valuables from dangerous temperature and humidity. They can also help you prevent frozen pipes, mold and food spoilage.
Monitor environmental conditions over the Internet with the Winland EnviroAlert EA800-ip Monitoring Console, 8 Zones. This advanced IP critical conditioning monitoring system supports up to eight sensors (sold separately) and allows remote access through a fee based online portal, providing a convenient way to view real-time data and history, and adjust your settings accordingly.
The Flood Screamer Wireless Water Alarm Control Kit is the easiest wireless water alarm system to use on the market. It allows central monitoring of 32 Water Pucks with an easy-to-read LED display and simple three step programming for each zone. Place it at any convenient location in your home or workplace while the Water Pucks or other sensors are put at the most strategic (and often less convenient) points where water damage may occur.
The WS-600 water sensor can be used with the Control Products HS-700 HomeSitter. The unit can be combined with other water sensors to maximize water sensing protection in any location where water is unwanted. More than one sensor can be used on the HS-700.
Perfect for monitoring areas that are prone to water leaks, such as the water heater closet or bathroom, the Fibaro Z-Wave Flood Sensor alerts you when it detects moisture. It also features a temperature sensor and tilt sensor, so you can receive temperature and tamper alerts. When any one of these three conditions is triggered, the Flood Sensor provides an LED alert, sounds a built-in siren, and sends an alarm signal to your Z-Wave network.
Your shopping cart is currently empty. Please navigate to a product and click "Add to Cart" to purchase it.
If you are having trouble adding an item to the cart, your browser or anti-virus software may be blocking cookies. Our system uses "cookies" to store a unique session identifier, which allows it to maintain shopping cart selections from one page to the next. Please enable cookies in your browser or anti-virus program in order to use our online checkout.
We are always happy to assist you with your order by phone at 1-800-487-1363 x127 (M-F 8-5 EST) or by email at firstname.lastname@example.org.