Sensaphone

NOTE: This unit is EOL and has been replaced by the Sensaphone Sentinel Monitoring System with Cellular Modem. If you would like to order a Cell682, while supplies last, please contact us and we can help with the order. Please also note Verizon will be sun-setting their 2G/3G Networks Dec 31, 2019 and will not activate any 2G/3G devices on their network after June 30th 2018.

50 ft. of shielded 22 gauge, 2 conductor, hookup wire used to connect sensors or thermostats to Sensaphone units or hardwired security systems.

The remote temperature sensor is designed to monitor air temperature indoors. It features terminal screw wiring connections, small size, and a convenient wall-mount housing.The sensor is accurate to +/- 1oF (0.56oC) and has a sensing range of -40oF to 175oF. Compatible with Sensaphone 400, Sensaphone 800, Sensaphone 1104, Sensaphone 1108, Sensaphone 1400, Sensaphone 1800, Sensaphone 2000, Sensaphone 2800, Sensaphone Express II, and Sensaphone Web 600.

The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.

The Sensaphone FGD-0102 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.

The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated.

The Sensaphone FGD-0103 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall–mounted enclosure. Accurate to 0.36 F (0.2 C) with a sensing range of 35 to 140 F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate.

The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation.

The XFR-0041 and XFR-0046  is a 5 V .3 amp transformer required when using the WSG30 wireless sensors as a router. This is required because router mode uses more power than can be supplied by batteries alone for an extended period of time. You can also use this power supply when the sensor is configured as an End Point, which will greatly extend the life of the batteries and minimize the need to change them.

The XFR-0041 and XFR-0046  is a 5 V .3 amp transformer required when using the WSG30 wireless sensors as a router. This is required because router mode uses more power than can be supplied by batteries alone for an extended period of time. You can also use this power supply when the sensor is configured as an End Point, which will greatly extend the life of the batteries and minimize the need to change them.

Exclusively for use with the FGD-0052 Humidity Transmitter, the FGD-0065 Carbon Monoxide Sensor, the FGD-0066 Air Quality Sensor, and the FGD-0068 Carbon Dioxide Sensor. It is only required when connecting the transmitter/sensors to the Sensaphone 2000. (Other compatible models supply their own 24V power.

Sensaphone FGD-0057 external microphone attachment for use with Sensaphone 1400, Sensaphone 1800, or Sensaphone Station Sitter. (Also compatible with Sensaphone Express II; however, that system comes with an external microphone already.

Sensaphone FGD-0221 USB to RS-232 Converter for use with Sensaphone 2000, Sensaphone SCADA 3000, Sensaphone Skymetry, and Sensaphone IMS models. .

Sensaphone IMS-4402 7' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4403 14' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4403 25' CAT5 Patch Cable for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4405 RJ-45 F/F Coupler Kit (4) for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4406 Wall Mount Kit for Sensaphone IMS-4000 The Wall bracket allows the IMS-4000 Host or Node to be mounted to any wall. It comes with (4) plastic drywall anchors and (4) #6 metal tapping screws. This is a special order item.

Sensaphone IMS-4407 Null Modem Cable for Sensaphone IMS-4000 This is a special order item.

Detects any unauthorized entry or intrusion. Usually installed on doors and windows, the sensors monitor their opening and closing. Several magnetic reed switches may be wired in series. Dimensions: 2.5" x 0.75" x 0.5" (part with screw terminals); 2.5" x 0.75" x 0.625" (part with magnet) Compatible with Sensaphone, hardwired security systems, and the WisDom Wireless Universal Transmitter.