Shop By

1- Price: $100.00 - $150.00 Remove this filter

Clear All Filters

Manufacturer 

Sensor Category 

Dialer Compatibility 

Sensor Connection 

Sensaphone

Items 1 - 13 of 13
Sensaphone FGD-0070 24V Power supply for 4-20mA Sensors w/ battery backup
4-20mA transducers require power to operate. Some Sensaphone products provide 24VDC power specifically for this purpose. When using a 4-20mA transducer with a model that does not, an external power supply is required. This 4-20mA Power Supply provides up to 8 hours of battery backup if main power fails.
$107.10
Availability:Usually ships in 1 to 2 business days.
 
Sensaphone Ethernet to WiFi Adapter
The Ethernet to WiFi Adapter is a high-speed, long-range outdoor wireless bridge that is an ideal solution for adding Wi-Fi connectivity to any network based Sensaphone. This is a cost effective solution when faced with running communication cable or trenching long runs of alarm wire to the Sensaphone.
$107.10
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0056 Zone Water Detector - Flood Sensor
The Zone Water Detector senses the presence of water via the attached WaterRope. The Zone Water Detector can be used with all models of Sensaphone. The sensor is a normally closed device. It operates on two (2) AA batteries (installed). The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope.
$126.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0101 2.8K Weatherproof Temperature Probe
The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.
$130.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0052 Humidity Transmitter
For use with all Sensaphone models* except 400 and 800. A space mount, low profile humidity transducer. Transmits actual humidity levels to the Sensaphone for programmable high and low alarm limits. The device can be used with any Sensaphone that supports 4-20mA inputs.
$149.99
Availability:Usually ships in 1 to 2 business days.
 
IMS-4820 Room Humidity Sensor for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4820 Room Humidity Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4820 humidity sensor is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node and monitor indoor humidity levels. The electrical connection between the sensor and IMS is made via RJ-45 patch cable (not included).
$119.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4830 Water Sensor w/ 10' Rope for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4830 Water/Flood Sensor with 10' Rope for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4830 Water Detection Sensor protects your server and equipment from damaging water leaks from malfunctioning HVAC systems, cafeteria accidents, or any general plumbing failures in your facilities.
$139.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4840 External Power Sensor for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4840 External Power Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4840 External Power Sensor lets you monitor power anywhere within your infrastructure. It reports any loss of power and measures the current voltage in the circuit, allowing you to know the status of each server rack and even of your remote UPS.
$139.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4862 Smoke Detector for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4862 Smoke Detector w/ 7' Cable for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4862 Smoke Detector Sensor is designed to connect to the IMS-1000 or IMS-4000 Host or IMS-4000 Node. It monitors for the presence of fire or smoke, and sounds an audible alarm as well as notifying the IMS of the condition.
$139.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4814 Ultra-Low Temperature Sensor for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4814 Ultra Low Temperature Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4814 Ultra Low Temperature Sensor is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node and monitor temperatures in refrigerators or freezers.
$129.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4815 Temperature Sensor w/ Glass Bead Vial for IMS (special order)
The IMS-4815 Temperature Sensor is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm such as defrost cycles, opening of doors and fans circulating air.
$149.00
Availability:Usually ships in 1 to 2 business days.
 
IMS-4863 Airflow Sensor  for IMS-1000/IMS-4000 (special order)
The Sensaphone IMS-4863 Airflow sensor is designed to monitor for the presence or absence of cool moving air. This is especially useful for monitoring air conditioning systems. The sensor can provide relative air flow as a percentage from 0 to 100. The sensor is compatible with both the Sensaphone IMS-1000 and Sensaphone IMS-4000 devices.
$119.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4816 External Probe Temperature Sensor for IMS (special order)
The IMS-4816 Temperature Sensor with External Probe is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node and monitor temperatures in areas where a traditional sensor won’t fit. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable.
$109.00
Availability:Usually ships in 1 to 3 business days.
 

Items 1 - 13 of 13