Sensaphone

SELF-POWERED infrared sensor that monitors the movement of warm bodies in a specific area. Will cause a dialout if motion is detected. The range is a maximum of 40 feet directly ahead of, and approximately 20 feet to either side of, the detector at 40 feet distance (see installation instructions for diagram).

The Humidistat Humidity Switch can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic, a nylon sensing element provides long life and accurate humidity control.

10 foot length of WaterRope for the FGD-0056 Zone Water Detector. Up to ten (10) lengths of 10 foot rope (total length 100 feet) can be cascaded from a single Zone Water Detector. Dimensions: 10 feet long Compatible with the FGD-0056 Zone Water Detector.

Old Code: M-001-0076, New Code: PS110 A compact power outage monitoring device to protect against power outages. The Power-Out Alert easily plugs into any 110 VAC receptacle outlet for operation.Works with all Sensaphone products.  Output is Normally Open. Includes 15 ft. cable.  Note:  This unit has an activation delay of approximately 3.

Sensaphone IMS-4810 Room Temperature Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4810 temperature sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor temperatures. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included).

Sensaphone IMS-4812 Mini-Temperature Sensor w/7' Cable for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4812 Mini Temperature Sensor is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node and monitor temperatures in tight locations (for example, inside equipment racks).

Sensaphone IMS-4831 Additional 10' Water Detection Rope for Sensaphone IMS-4830 Water Sensor This is a special order item.

Sensaphone IMS-4850 Dry Contact Bridge (N/O, N/C) for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS Dry Contact Bridge allows you to connect a dry contact alarm from any device to your Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts.

Sensaphone IMS-4860 Magnetic Reed Sensor w/Bridge for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS Door Switch with bridge enables your Sensaphone IMS-1000 or Sensaphone IMS-4000 to detect if any unauthorized entry or intrusion has occurred. The bridge may be mounted either on a wall or rest on the floor.

Sensaphone IMS-4861 Passive Infrared Motion Detector w/ 7' Cable for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4861 Passive Infrared Detection Sensor is a dual-element passive infrared intrusion detector for use in electronic security systems. It reduces false alarms by eliminating background noises and nuisance stimuli.