Sensaphone

The Sensaphone FGD-0103 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall–mounted enclosure. Accurate to 0.36 F (0.2 C) with a sensing range of 35 to 140 F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate.

The Sensaphone FGD-0105 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a brass 0.

The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation.

For use with all Sensaphone models* except 400 and 800. A space mount, low profile humidity transducer. Transmits actual humidity levels to the Sensaphone for programmable high and low alarm limits. The device can be used with any Sensaphone that supports 4-20mA inputs.

Exclusively for use with the FGD-0052 Humidity Transmitter, the FGD-0065 Carbon Monoxide Sensor, the FGD-0066 Air Quality Sensor, and the FGD-0068 Carbon Dioxide Sensor. It is only required when connecting the transmitter/sensors to the Sensaphone 2000. (Other compatible models supply their own 24V power.

Old Code: M-001-0076, New Code: PS110 A compact power outage monitoring device to protect against power outages. The Power-Out Alert easily plugs into any 110 VAC receptacle outlet for operation.Works with all Sensaphone products.  Output is Normally Open. Includes 15 ft. cable.  Note:  This unit has an activation delay of approximately 3.

The Sensaphone Carbon Dioxide sensor will allow you to monitor levels of Carbon Dioxide from 0-2,000ppm with any Sensaphone that will accept a 4-20mA input signal. The sensor will need a 24VDC power supply to operate (Part # FGD-0053).

The Sensaphone FGD-0220 J-Type Thermocouple/4-20mA Converter will allow you to use a standard J-type thermocouple on any Sensaphone that accepts a 4-20mA input signal. Thermocouple not included. This thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that cannot be monitored with a standard Sensaphone temperature sensor.

Detects any unauthorized entry or intrusion. Usually installed on doors and windows, the sensors monitor their opening and closing. Several magnetic reed switches may be wired in series. Dimensions: 2.5" x 0.75" x 0.5" (part with screw terminals); 2.5" x 0.75" x 0.625" (part with magnet) Compatible with Sensaphone, hardwired security systems, and the WisDom Wireless Universal Transmitter.