WSG Wireless Zone Water Detection Sensor (special order)
- Comparsion / Tutorials
- Manuals / Downloads
The WSG30 Wireless Zone Water Detection Sensor is designed to work with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and ten feet of water sensing cable for monitoring for the presence of water in a particular area. The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope. You can connect up to ten lengths of WaterRope (100′) to one Zone Water Detector. The sensor comes with three AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply (XFR-0041) is also available. The batteries then become a backup if main AC power fails.
Routers and End-points
WSG30 wireless sensors can be configured as either routers or end-points. A sensor configured as a router can be used to provide redundant wireless paths from your sensors back to the WSG30. This is useful if the distance from your sensors to your WSG30 is too far for direct communication. Note that routers must be powered by an external power adapter. In this case, the sensor’s AA batteries will serve as backup in the event of a power failure. Note that routers are required once you exceed 7 end-points.
You can have as many routers as you like. A sensor configured as an end-point will simply send its readings back to the WSG30, or a nearby router, and then go into a very low power mode. End-points can be battery-powered and have the capability of operating on batteries for several years. If the end-point is too far from the WSG30 for direct communication, a router must be installed to bridge the gap.
- Operating Temperature Range: 32° to 122°F (0° to 50°C)
- Operating Humidity Range: 0-95%
- Transmit Power Output:100mW (20dBm)
- Range: Up to 300′ (90m)
- Power Requirements: (3) AA Batteries / 5VDC Power Supply (Router Mode)
- Wireless Technology: ISM 2.4GHz, 100 mW (20dBm)
- Size: 6.8″ x 3.5″ x 1.5″
- (x1) WSG Wireless Zone Water Detection Sensor
- (x3) AA Alkaline batteries
- (x1) 10′ WaterRope
- (x5) Adhesive cable clamps
- (x1) Mounting kit