Honeywell EConnect Wireless Line Voltage Thermostat w/ Gateway
- Features/ Specs
- Also Bought
Today, most electric heat is controlled from a knob on the baseboard, or a built-in control on the heater, that is typically located near the floor- not the ideal control or sensing location for maintaining a comfortable home environment.
Even though it is possible to add a wall control to electric heat systems, it often means having to open up and re-patch walls for wiring, which can add extra mess, time, and cost. Thanks to Honeywell’s RedLINK Wireless Technology and EConnect, those days are gone.
Since EConnect is completely wireless, your electrician can install your thermostat wherever you want it in the room - improving comfort without requiring any renovation. A single EConnect thermostat can control all heaters in the room, for maximum convenience, energy efficiency, and comfort.More Info...
Wireless Systems put an end to those hidden obstacles. The Honeywell EConnect wireless thermostat for electrical heating installs in half the time of a wired thermostat. It is compatible for direct installation in most baseboards or can be installed in a remote junction box. Each Equipment Interface Module can support a maximum load of 3000W at 240V and can be used to control baseboards, convectors and fan forced heaters.
This set also contains the RedLINK Internet Gateway. With the addition of this unit you can remotely access your RedLINK enabled thermostat through the internet, smart phone or tablet.
The Gateway is the heart of the system. It creates an internet link for remote control of the thermostats. A basic kit consists of a Gateway, a thermostat and electronic interface module (EIM). This kit will control up to 3000 Watts of heating at 240 volts (1500 watts at 120 volts). If you need to control additional heaters from the same thermostat, you can purchase additional EIM kits. You can control a maximum of 8 EIM units (24,000 watts) with a single thermostat. You can purchase additional thermostats with EIM if you need to control different zones. Only one Gateway is required for the entire system.
Professional Installation is strongly recommended
- Wireless Installation – eliminates opening walls for system or control upgrades
- Precise Temperature Control – on the wall where it belongs, for optimal sensing and comfort
- Electronic Programmable Thermostat – enables energy savings of up to 33%
- User-friendly, Plain-language Interface – easily adjust your comfort settings
- Compatible Wireless Accessories – for added comfort and convenience
- RedLINK enabled to communicate with compatible wireless devices.
- Control any RedLINK enabled thermostat.
- 3 foot ethernet cable included.
- Simple installation to home or business router.
- Easily change system modes and indoor temperature through the web portal or mobile app.
- Multiple HOLD options allows modification of schedule as needed.
- High/Low temperature and humidity messaging alerts the user when the indoor conditions are too high or too low.
|Application||Convector or Fan-forced Heater|
|Programmability||5-2 Day Program|
|Programmability||7 Day Program|
|Color||Antenna: White or Light Almond|
|Power Method||Thermostat: Battery|
|Power Method||EIM: Hardwired|
|Dimensions (in.)||Thermostat: 5.13 in. high x 3.22 in. wide x 1.14 in. Deep|
|Dimensions (in.)||Relay: 3.03 in. high x 2.49 in. wide x 1.28 in. Deep|
|Dimensions (in.)||Antenna: 2.89 in. high x 2.63 in. wide x 1.16 in. Deep|
|Dimensions (mm)||Thermostat: 130 mm high x 82 mm wide x 29 mm Deep|
|Dimensions (mm)||Relay: 73 mm high x 63 mm wide x 29 mm Deep|
|Dimensions (mm)||Antenna: 71 mm high x 62 mm wide x 33 mm in. Deep|
|Electrical Ratings||Minimum Load: 0.4 A (resistive only) 100 W @ 240 Vac, 50 W @ 120 Vac|
|Electrical Ratings||Maximum Load: 12.5 A (resistive only), 3000 W @ 240 Vac, 1500 W @ 120 Vac|
|Electrical Connections||6 in. (150 mm) tinned copper lead wires|
|Operating Temperature Range (F)||Thermostat: 32°F - 122°F|
|Operating Temperature Range (F)||EIM: -4°F - 140°F|
|Operating Temperature Range (C)||Thermostat: 0°C - 50°C|
|Operating Temperature Range (C)||EIM: -20°C - 60°C|
|Setting Temperature Range (F)||41°F - 86°F|
|Setting Temperature Range (C)||5°C - 30°C|
|Differential Temperature (F)||1°F|
|Differential Temperature (C)||0.5°C|
|Outdoor Sensor||C7089R1013, optional|
|Operating Humidity Range (% RH)||Thermostat: 5 to 90% RH, non-condensing|
|Operating Humidity Range (% RH)||EIM: 5 to 95% RH, non-condensing|
|Temperature Range, Ambient (F)||32°F - 104°F|
|Temperature Range, Ambient (C)||0°C - 40°C|
|Approvals, Underwriters Laboratories Inc||Approved|
|Approvals, Federal Communications Commission||Approved|
|Approvals, NEMA Standard||Energy Aware|
|Comments||English Only User interface. For French User Interface, use Aube YTA7210-AR-SPK|
|Display Size||4.53 sq. in.|
|Voltage||100 to 240 Vac|
GatewayApplication - Internet control of RedLINK thermostats; Up to 4 Heat/2 Cool Heat Pumps
Dimensions (in.)- 1.125 in. depth X 3.904 in. height X 3.578 in. width
Dimensions (mm)- 29 mm depth X 99 mm height X 91 mm. width
Includes - 3 Foot Ethernet Cable and 5Vdc,1000mA Plug in Power Adapter
Used With - RedLINK™ enabled thermostats and accessories
Electrical Ratings - 20 to 30 Vac
Frequency - 902 - 928 MHz
Electrical Connections - 24 Volt Plug In Transformer
Operating Humidity Range (% RH) - 5 to 90% RH, non-condensing
Operating Temperature Range (F) - -40 F to 165 F
Operating Temperature Range (C) - -40 C to 74 C
Power Method - a 5Vdc,1000mA power adapter
Color - White