| |
|
|
|
|
|
SwamCam |
| |
|
|
|
|
|
|
| Manufacturer |
|
|
|
|
|
SwamCam |
| Remote
receiver/range |
YES
/ 200ft
|
YES
/ 800ft los
|
Yes
/ 100ft
|
NO,
but capable of transmitting to one (should be purchased as an addition to a
PA-30 or GA-30)
|
YES
/ 200ft
|
Yes / 50ft |
| Pool type and
size |
Above
Ground - 16'x 32' (24' in diameter)
|
Any
- child/pet wears wristband
|
Above
Ground and Inground pools up to 20' x 40'
|
All
types - up to 20' x 40'
|
All
types - up to 20' x 40'
|
Any as long as the whole pool area can be seen by the camera |
| Alert |
85db
horn @ 10ft until acknowledged or for 5 minutes
|
Flashes
and alarms @ 110 decibels until acknowledged or for 30 minutes.
|
Poolside
siren 85+ dB @10ft Until acknowledged or for
3 minutes
|
85+
db alarm sounds until acknowledged or for 3 minutes
|
85+
db alarm sounds until acknowledged or for 3 minutes
|
Audible Alert from Camera and WiFi extender plus push notifications from theApp |
| Min weight
detected |
18lbs
|
NA
|
15lbs
|
8lbs
|
8lbs
|
NA |
| Power |
Poolside
alarm - 9 volt (not included) battery life of
approximately one year. Remote receiver - 12v power supply
(included)
|
Sensors -Non-replaceable battery lasts 3 – 4 years, Base station -AC Adapter (included)
|
Remote
back-up 9 Volt battery (not incl.), Poolside unit - Two (2) 9 Volt
batteries (not incl.)
|
9
volt battery (battery life of approximately 4 months) (not included)
|
9
volt battery (battery life of approximately 4 months) (not included), Remote receiver - 12v power supply
|
Camera: DC 12V/1A
Extender/Receiver: AC ~110~240V
Keypad: 2 x AAA Bat
|
| Requires removal during swimming |
Yes
|
Yes
|
No
|
Yes
|
Yes
|
No |
| "Swim Mode" with auto-reset |
No
|
N/A
|
Yes,
5 min reset
|
No
|
No
|
Yes, reset time is adjustable |
| Can integrate with home security system/autodialer |
No
|
No
|
No
|
No
|
Yes
|
No |
| Low battery
indicator |
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes via the App
|
| Warranty |
Three
Year Limited Warranty
|
Base
Station - 12 months, Turtle sensor - 6 months
|
One-year
limited warranty
|
Two
year warranty - parts and labor.
|
Two
year warranty - parts and labor.
|
On year warranty, Extended warranty available with premium subscription |
| Installation |
Tethered to pool
|
Sensors
are worn, base station where preferred (not weatherproof)
|
Stainless
steel deck mounting system and ladder mounting system included
|
Tethered
to pool
|
Tethered
to pool
|
Camera is mounted to a wall or fence, Keypad also mounted to wall or fence and receiver/extended plugs into AC plug indoors |
| Special
features |
Tamper
Proof: alarm will sound when removed from the pool.
|
Works
with any water hazard: pool, hot tub, pond, river/lake, No installation is required,
portable
|
Magnetic
key for activating/resetting
|
Low
weight requirement (8lbs), useful for small pets
|
Can
program several pool alarms as well as gate alarms to one transmitter, (must
order at same time and have programmed at factory), adjustable sensitivity
|
App to allow remote monitoring and control of the system. User can use the app to check in and communicate with those in the pool area. |
| Detection
type |
Subsurface
Wave Detection
|
Submersion
of sensors
|
Surface
and Subsurface Wave Detection
|
Surface
Wave detection
|
Surface
Wave detection
|
Motion Detection when camera is armed |
