Automatic Water Shut off Valves

Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding Flood sensors feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range, user adjustable digital security codes, and operate on either two (2) AA batteries or an optional AC power adapter.

Provides a quick, convenient, and positive shut-off of your main water supply at the touch of a button. Allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for the kitchen, utility room, or near a garage entry. Using standard category-5 computer cabling and RJ45 modular connectors (cabling and connectors not included) it can be located up to 300 feet from the WaterCop Classic Control Valve.

Operates wireless sensors without need for batteries. UL listed.

Newly designed signal repeater retransmitts Classic sensor signal to WaterCop Classic shut-off valve. Compatible with previous generation WaterCop Classic Sensors (WH100, WH200, FH100) as well as newly designed Classic Sensors (WCDFS1 & WCDFS2)

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

The WaterCop Low Temperature and Water Leak Sensor has a temperature sensor for monitoring a pipes exterior temperature and has a water sensor both connected on 5 foot cords. Monitor the temperature of pipes in locations at risk of freezing conditions (38degrees (+/-1) ). This sensor sends a signal to the Watercop Classic Actuator with Valve to turn off the water before pipes burst.

RSA-175-010 consists of a 10' length of sensing rope that can be connected to RSA-175-810 starter kit (10' length of sensing rope + 6' lead wire) or RSA-360-810 Rope kit for wireless sensors. Up to 9 additional RSA-175-010 can be added to the RSA-175-810 or RSA-360-810 for wide area of leak detection requirements.

Certain applications or leak detection requirements may require the use of this Sensing Rope in place of traditional FloodMaster sensor "pucks" – most notably when a wider area of leak detection is desired. This highly absorbent water sensing rope is constructed from two twisted metal conductor wires that are insulated from one another and surrounded by a polyethylene mesh braid jacket.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.