Sensaphone

SELF-POWERED infrared sensor that monitors the movement of warm bodies in a specific area. Will cause a dialout if motion is detected. The range is a maximum of 40 feet directly ahead of, and approximately 20 feet to either side of, the detector at 40 feet distance (see installation instructions for diagram).

Detects the presence of water on a horizontal surface. INDEPENDENTLY POWERED* by internal lithium batteries. Multiple sensors can be wired in series to a single input. Comes with 10' of hookup wire. (Additional wire available for purchase...see part number FGD-0010 or FGD-0010B). *It is essential that any water sensor used with the Sensaphone or a WisDom Wireless Universal Transmitter be self-powered.

The Temp Alert can be used with all Sensaphone models to monitor air temperature from 20 to 110 F (6.7 to 43.3 C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm.

The Humidistat Humidity Switch can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic, a nylon sensing element provides long life and accurate humidity control.

10 foot length of WaterRope for the FGD-0056 Zone Water Detector. Up to ten (10) lengths of 10 foot rope (total length 100 feet) can be cascaded from a single Zone Water Detector. Dimensions: 10 feet long Compatible with the FGD-0056 Zone Water Detector.

The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.

The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated.

The Sensaphone FGD-0104 10K Outdoor Air Weatherproof Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather–resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation.

The Sensaphone FGD-0105 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a brass 0.

Old Code: M-001-0076, New Code: PS110 A compact power outage monitoring device to protect against power outages. The Power-Out Alert easily plugs into any 110 VAC receptacle outlet for operation.Works with all Sensaphone products.  Output is Normally Open. Includes 15 ft. cable.  Note:  This unit has an activation delay of approximately 3.

With the addition of the optional battery backup module, the Sensaphone WEB 600 can monitor for power failures and stay operational for three full hours while the power is out.

Sensaphone IMS-4810 Room Temperature Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4810 temperature sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor temperatures. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included).

Sensaphone IMS-4812 Mini-Temperature Sensor w/7' Cable for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4812 Mini Temperature Sensor is designed to connect to the Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node and monitor temperatures in tight locations (for example, inside equipment racks).

Sensaphone IMS-4831 Additional 10' Water Detection Rope for Sensaphone IMS-4830 Water Sensor This is a special order item.

Sensaphone IMS-4850 Dry Contact Bridge (N/O, N/C) for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS Dry Contact Bridge allows you to connect a dry contact alarm from any device to your Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts.

Sensaphone IMS-4860 Magnetic Reed Sensor w/Bridge for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS Door Switch with bridge enables your Sensaphone IMS-1000 or Sensaphone IMS-4000 to detect if any unauthorized entry or intrusion has occurred. The bridge may be mounted either on a wall or rest on the floor.

Sensaphone IMS-4861 Passive Infrared Motion Detector w/ 7' Cable for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4861 Passive Infrared Detection Sensor is a dual-element passive infrared intrusion detector for use in electronic security systems. It reduces false alarms by eliminating background noises and nuisance stimuli.