Shop By

1- Price: $150.00 - $200.00 Remove this filter

Clear All Filters

Manufacturer 

Sensor Category 

Dialer Compatibility 

Sensor Connection 

Sensaphone Accessories

Items 1 - 13 of 13
FGD-0101 2.8K Weatherproof Temperature Probe
The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.
$175.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0107 2.8K Temperature Sensor with Glass Bead Vial
The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated.
$155.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0107 2.8K Temperature Sensor with Glass Bead Vial
The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated.
$175.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Sensaphone 4-20mA Type Pressure Sensor
The Sensaphone Pressure Sensor can be used to measure and detect loss of pressure in many applications. An alarm from the pressure sensor can indicate a problem with a pump, a possible clogged influent line, loss of suction, a downstream clog or perhaps a burst pipe. Any of those failures can cause a pump motor to overheat and warp.
$159.00
Availability:Usually ships in 1 to 2 business days.
 
ENCLOSURE14126 for Sensaphone 400/800/1104/1108 (special order)
Quick-release padlockable weatherproof window enclosure for Sensaphone 400, Sensaphone 800, Sensaphone 1104, or Sensaphone 1108. Includes back panel for mounting. UL Listed Types 2, 3, 3R, 4, 4X, 5, 12, 13 Types 6/6P with 4 screws Suitable for wet locations NITW - Industrial Control Panel Enclosures Individually boxed Stainless steel latch(es)/4 hole covers 4 Polycarbonate mounting feet Aluminum backing Box size: 14"H x 12"W x 6"
$184.99
Availability:Usually ships in 3 to 4 business days.
 
Pole Mount Kit for SAT4D (special order) FGD-SAT4D-PKIT
Pole Mount Kit for Sensaphone SAT4D. This is a special order item.
$175.50
Availability:Usually ships in 1 to 3 business days
 
WSG Wireless Dry Contact Sensor (special order)
The WSG Wireless Dry Contact sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and input terminals for connecting to any normally-open or normally closed output. (Use of this device with solid-state outputs is not recommended) The sensor comes with two AA alkaline batteries which will power the sensor for up to two years.
$189.00
Availability:Usually ships in 2 to 3 business days.
 
WSG Wireless Power Failure Sensor (special order)
The WSG Wireless Power Failure sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter, two AA alkaline batteries and a wall plug in power supply. The sensor will detect a loss of power at the outlet where the power supply is attached. The two AA alkaline batteries will power the sensor and allow it to transmit alarm information in the event that 120VAC power fails.
$199.00
Availability:Usually ships in 2 to 3 business days.
 
WSG Wireless Temperature Sensor with External Probe (Special Order)
The WSG Wireless Temperature sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and temperature element for monitoring temperature wherever the device is installed. You can remove the internal temperature element and attach a remote temperature probe so that measurements can be made in a refrigerator, freezer or other harsh environment.
$199.00
Availability:Usually ships in 2 to 3 business days.
 
WSG30-TMP Wireless Temperature Sensor (Special Order)
The WSG Wireless Temperature sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and temperature element for monitoring temperature wherever the device is installed. You can remove the internal temperature element and attach a remote temperature probe so that measurements can be made in a refrigerator, freezer or other harsh environment.
$189.00
Availability:Usually ships in 2 to 3 business days.
 
IMS-4841 AC Current Sensor, up to 15 Amps, C13/C14, for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4841 AC Current Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS-4841 15A Current Sensor lets you monitor current consumption of a particular device or circuit anywhere within your infrastructure. It reports the actual current flow in the circuit, allowing you to know the status of each server rack and even of your remote UPS.
$185.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4842 IMS AC Current Sensor, up to 20 Amps, C19/C20, for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4842 IMS AC Current Sensor for Sensaphone IMS-4000 or Sensaphone IMS-1000 The Sensaphone IMS-4842 20A Current Sensor lets you monitor current consumption of a particular device or circuit any-where within your infrastructure. It reports the actual cur-rent flow in the circuit, allowing you to know the status of each server rack and even of your remote UPS.
$199.00
Availability:Usually ships in 1 to 3 business days.
 
IMS-4851 4-20mA Bridge for IMS-1000/IMS-4000 (special order)
Sensaphone IMS-4851 4-20mA Bridge for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS 4-20mA Bridge allows you to connect a 4-20mA transducer to your Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The 4-20mA Bridge features optical isolation between the input and the IMS, which ensures trouble-free operation and safety.
$159.00
Availability:Usually ships in 1 to 3 business days.
 

Items 1 - 13 of 13