The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation.
Old Code: 1014, New Code: TA1
The Temp Alert can be used with all Sensaphone models to monitor air temperature from -30 to 130 F (-34 to 54 C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm.
Detects the presence of water on a horizontal surface.
INDEPENDENTLY POWERED* by internal lithium batteries.
Multiple sensors can be wired in series to a single input.
Comes with 10' of hookup wire. (Additional wire available for purchase...see part number FGD-0010 or FGD-0010B).
*It is essential that any water sensor used with the Sensaphone or a WisDom Wireless Universal Transmitter be self-powered.
The Humidistat Humidity Switch can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic, a nylon sensing element provides long life and accurate humidity control.
Old Code: M-001-0076, New Code: PS110
A compact power outage monitoring device to protect against power outages. The Power-Out Alert easily plugs into any 110 VAC receptacle outlet for operation.Works with all Sensaphone products. Output is Normally Open. Includes 15 ft. cable.
Note: This unit has an activation delay of approximately 3.
The Zone Water Detector senses the presence of water via the attached WaterRope. The Zone Water Detector can be used with all models of Sensaphone. The sensor is a normally closed device. It operates on two (2) AA batteries (installed).
The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope.
10 foot length of WaterRope for the FGD-0056 Zone Water Detector.
Up to ten (10) lengths of 10 foot rope (total length 100 feet) can be cascaded from a single Zone Water Detector.
Dimensions: 10 feet long
Compatible with the FGD-0056 Zone Water Detector.
SELF-POWERED infrared sensor that monitors the movement of warm bodies in a specific area. Will cause a dialout if motion is detected.
The range is a maximum of 40 feet directly ahead of, and approximately 20 feet to either side of, the detector at 40 feet distance (see installation instructions for diagram).
Detects any unauthorized entry or intrusion. Usually installed on doors and windows, the sensors monitor their opening and closing. Several magnetic reed switches may be wired in series.
Dimensions: 2.5" x 0.75" x 0.5" (part with screw terminals); 2.5" x 0.75" x 0.625" (part with magnet)
Compatible with Sensaphone, hardwired security systems, and the WisDom Wireless Universal Transmitter.
The multi-point wireless I/O system is ideal for connecting dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far (or too expensive) to run cable. The system will replicate these sensors up to a distance of 600’ indoors or up to 4 miles line of site (flat terrain, raised antennas).
Your shopping cart is currently empty. Please navigate to a product and click "Add to Cart" to purchase it.
If you are having trouble adding an item to the cart, your browser or anti-virus software may be blocking cookies. Our system uses "cookies" to store a unique session identifier, which allows it to maintain shopping cart selections from one page to the next. Please enable cookies in your browser or anti-virus program in order to use our online checkout.
We are always happy to assist you with your order by phone at 1-800-487-1363 x127 (M-F 8-5 EST) or by email at email@example.com.