Shop By

Communication Method 

Alarm Notification 

Dialer Compatibility 

Sensor Connection 

Thermostat Type 

Technology 

Inputs 

  • 1 (2)
  • 2 (2)
  • 4 (2)

Condition Monitored w/out added sensor 

Temperature Setpoint 

Input Type 

Outputs 

  • 1 (2)
  • 2 (1)

Remote Programming 

Thermostat/Relay Control 

Sensaphone Accessories

Items 21 - 40 of 137
FGD-0056 Zone Water Detector - Flood Sensor
The Zone Water Detector senses the presence of water via the attached WaterRope. The Zone Water Detector can be used with all models of Sensaphone. The sensor is a normally closed device. It operates on two (2) AA batteries (installed). The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope.
$126.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0063 10' WaterRope

FGD-0063 10' WaterRope

Item#: FGD-0063
10 foot length of WaterRope for the FGD-0056 Zone Water Detector. Up to ten (10) lengths of 10 foot rope (total length 100 feet) can be cascaded from a single Zone Water Detector. Dimensions: 10 feet long Compatible with the FGD-0056 Zone Water Detector.
$81.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0102 10K Weatherproof Temperature Probe (for models 1400 and up)
The Sensaphone FGD-0102 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits.
Regular Price: $30.00
On Sale For: $27.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
FGD-0103 10K Indoor Decorator Zone Temp Sensor (special order)
The Sensaphone FGD-0103 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall–mounted enclosure. Accurate to 0.36 F (0.2 C) with a sensing range of 35 to 140 F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate.
Regular Price: $40.00
On Sale For: $36.00
Availability:Usually ships in 1 to 2 business days.
 
Risco Shocktec Plus Wired Shock Detector w/ Magnet
The ShockTec Plus with Magnetic Contact ensures double protection on opening windows and doors. The detector can be mounted vertically or horizontally, with the magnetic contact on either side of the detector NOTE: When used with Sensaphone, read more
$23.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Risco Vitron Glass Break Simulator/Tester
The easy-to-operate ViTRON Tester simulates Glass-Break sounds to verify proper installation of the ViTRON alarm.  
$59.99
Availability:Temporarily out of stock. Contact us for ETA.
 
FGD-0104 10K Outdoor Air Weatherproof Temperature Sensor (spec. order)
The Sensaphone FGD-0104 10K Outdoor Air Weatherproof Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather–resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation.
Regular Price: $70.00
On Sale For: $63.00
Availability:Usually ships in 1 to 2 business days.
 
FGD-0105 10K Immersion Temperature Sensor
The Sensaphone FGD-0105 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a brass 0.
Regular Price: $60.00
On Sale For: $54.00
Availability:Usually ships in 1 to 2 business days.
 
Brass 2.8K Immersion Temp Sensor (for models 400 & UP) (special order)
The Sensaphone FGD-IM28B 2.8K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of Brass WEL-B thermowell (which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a Brass 0.
$75.00
Availability:Usually ships in 2 to 3 business days.
 
MTA-1 - Mechanical Temp Alert
Old Code: 1200, New Code MTA1 The professional looking MTA-1 Mechanical Temp Alert adds reliable and economical temperature protection to your residential or commercial security system* or Sensaphone Autodialer. The design can be used anywhere the monitoring of high and low temperature limits is critical.
$59.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Stainless Steel 2.8K Immersion Temp Sensor  (for models 400 & UP) (special order)
The Sensaphone FGD-IM28KSS 2.8K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of Stainless Steel WEL-S thermowell (which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe).
$98.00
Availability:Usually ships in 2 to 3 business days.
 
Winland WaterBug 200 Water/Flood Sensor 12VDC (WB-200)
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensor probes wired in parallel, up to 100 feet away using 22-18 AWG twisted pair. Each sensor probe has two contacts.
$59.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland Surface Water Sensor for WB-200/WB-350
The standard surface water probe is unsupervised and can be connected to the full line of WaterBug products only. Alarm will sound when water is detected but no alarm will sound if the cable is cut. Additional surface sensor for the WaterBug 200 or WaterBug 350 models.
$20.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland Supervised Under Carpet Water Sensor for WB-800 & EnviroAlert
The supervised under carpet water sensor can be connected to the EnviroAlert products as well as the WB-800. The alarm will be activated if water is present as well as if the cable is cut. Supervised under carpet water sensor for the WaterBug 800, EnviroAlert 200, EnviroAlert 400, and EnviroAlert EA800-ip.
$49.98
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland WB-350 WaterBug 350 Water/Flood Sensor - 9V Battery Operation (WB-350)
Old Code: 1047, New Code: WB350 Use with your Sensaphone for invaluable protection against costly water damage! When used with WisDom, either use your one wired zone or use with a Universal Transmitter to make it wireless The model WB-350 operates on a 9-volt transistor battery (Not included) has an open collector output that can be connected to alarm panels, bells, dialers, etc.
$98.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland Under Carpet Water Detection Sensor for WB-200/WB-350
The standard Under Carpet Water probe is unsupervised and can be connected to the full line of WaterBug products. Alarm will sound when water is detected but no alarm will sound if the cable is cut. Under carpet water sensor. Accessory for: WaterBug WB-200 WaterBug WB-350 WaterBug WB-800
$67.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
WS-04E WaterSiren Pro- Water/Flood Sensor
Sounds an alarm and an auxiliary alarm contact output! The WaterSiren Pro is an affordable solution to alerting you quickly of water leaks and it can close (or open) an alarm contact which can trigger an alarm system or a telephone dialer such as our TempAlarm Pro (FA-900E) or older Deluxe FreezeAlarm (FA-D2).
$35.00
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland WaterBug 800 Water Sensing System (WB-800)
Old Code: M-001-0005, New Code: WB800 The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm.
$298.99
Availability:Temporarily out of stock. Contact us for ETA.
 
Winland Water Sensor (Supervised) for WB-800 and EnviroAlert systems
Supervised surface water sensor for use with the WaterBug 8 zone water detection monitor (WB-800) or the EnviroAlert (EA200, EA400, OR EA800-ip). Stable surface mount design. Supervised probes will alarm if wire is severed as well as when water is detected. Maximum recommended cable run [22 AWG twisted pair] 500’ (152.
$29.99
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 
Winland EA200 2 Zone EnviroAlert Monitoring Device
Monitor two zones with one on-board temperature sensor and an additional remote temperature, humidity or water sensing probe. If temperatures and/or humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor, the designate relay for each zone will activate an alarm, dialer, siren, etc.
$90.25
Availability:In Stock. Order by 2pm EST for same-business-day shipping.
 

Items 21 - 40 of 137