Automatic Water Shut off Valves

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

Enable remote notifications and control of your FloLogic System from anywhere with the Gateway Connect Package and FloLogic app. The FloLogic Gateway Connect Package includes the Gateway Module and Gateway-enabled Connect Module. These are components required to enable app-based command and control of a FloLogic System.

The RIB Relay for 220 Volt Circuit (RIB02BDC) provides a communication interface between the FloLogic System and 240VAC devices such as well pumps and water heaters in order to cut power to devices when the FloLogic System turns off the water.

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

System battery for use with normal operation and provides back-up power in the event of loss of A/C. Works with all Flologic 3.0 and 3.5 systems. Sealed lead acid battery, 12V.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

For single water appliances like water heaters, protect with this single appliance LeakStop PLUS WaterCop system. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet. Also has a security output. Install the water valve, install the controller and place the two moisture sensor probes where water is likely to accumulate under or near the appliance.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.

Say goodbye to extensive damage caused by water leaks and floods that may be generated by common plumbing related failures! With its automatic shut-off valve, the WaterCop is designed to detect moisture and subsequently cut-off access from the main water supply line, preventing the leak from developing further.