Automatic Water Shut off Valves

Provides a quick, convenient, and positive shut-off of your main water supply at the touch of a button. Allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for the kitchen, utility room, or near a garage entry. Using standard category-5 computer cabling and RJ45 modular connectors (cabling and connectors not included) it can be located up to 300 feet from the WaterCop Classic Control Valve.

Operates wireless sensors without need for batteries. UL listed.

Newly designed signal repeater retransmitts Classic sensor signal to WaterCop Classic shut-off valve. Compatible with previous generation WaterCop Classic Sensors (WH100, WH200, FH100) as well as newly designed Classic Sensors (WCDFS1 & WCDFS2)

Reset Switch for WaterBlock Shutoff-Device. This simple mechanical device allows the user to reset the WATERBLOCK after it has been activated without the need to disassemble the water hose. The plunger activation will restart the normal functions of the connected WATERBLOCK.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Features heavy duty molded RJ45 end connections for years of reliable service. Used to easily connect WaterCop Classic Control Valve to the Remote Mount Control Switch.

Snagless CAT-5/5E Patch Cables (25-ft; Gray) 25-ft Gray Premium cabling for CAT-5/5E applications Rated for 350 MHz/1 GBps communications IEEE 802.3ab PVC 4-pair stranded UTP All cables feature boots with RJ45 male connectors Lifetime warranty

RSA-175-010 consists of a 10' length of sensing rope that can be connected to RSA-175-810 starter kit (10' length of sensing rope + 6' lead wire) or RSA-360-810 Rope kit for wireless sensors. Up to 9 additional RSA-175-010 can be added to the RSA-175-810 or RSA-360-810 for wide area of leak detection requirements.

Certain applications or leak detection requirements may require the use of this Sensing Rope in place of traditional FloodMaster sensor "pucks" – most notably when a wider area of leak detection is desired. This highly absorbent water sensing rope is constructed from two twisted metal conductor wires that are insulated from one another and surrounded by a polyethylene mesh braid jacket.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Can be used with Floodstop, Wisdom, Sensaphone, or CT240,CT241 When used with the Floodstop shutoff valves this unit can safely shut down your washer to avoid further water damage if your discharge hose is the cause of the water detected by the water sensor. The CN-15MP power relay provides a 15 amp relay, and the CN-20MP provides a 20 amp relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 control wiring.

Can be used with Floodstop, Wisdom, Sensaphone, or CT240,CT241 When used with the Floodstop shutoff valves this unit can safely shut down your washer to avoid further water damage if your discharge hose is the cause of the water detected by the water sensor. The CN-15MP power relay provides a 15 amp relay, and the CN-20MP provides a 20 amp relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 control wiring.

For use with WaterCop systems WCACT1, WPMS, and WPMSH units when paired with WCSCLV. UL listed.

AC/DC Adapter for AVD-45C Autodialer

For use with AVD45C Automatic phone Dialer model Provides 24 hour back-up power in the event of a power outage Automatically recharges

Controller Replacement for all Floodstop single valve systems, such as water heater/whole house units or dishwasher units. This part is only the Controller and does not include the power supply or batteries. The Controller can be powered by the AC/DC Wall Adaptor (power supply) and insert 4 AA batteries as a battery backup. You can also use 4 AA batteries as primary power source if there’s no 110V outlet nearby to use the AC/DC Wall Adaptor.

Controller Replacement for all Floodstop dual valve systems, such as washing machine or sink units. This part is only the Controller and does not include the power supply or batteries. The Controller can be powered by the AC/DC Wall Adaptor (power supply) and insert 4 AA batteries as a battery backup. You can also use 4 AA batteries as primary power source if there’s no 110V outlet nearby to use the AC/DC Wall Adaptor.